Designer of industrial equipment for textiles of all types
FM20P rubbing frame with can delivery
Technical supportFM20P rubbing frame with can delivery
- High doubling capacity
- Efficient as fore-finishers instead GV 20, in preparation units for fine count yarns.
- Can feeding of non conventional spinning frames
- Delivery in high capacity cans Ø 500 x 1200 mm
Technical specifications *
| Processed materials | Wool, long staple fibres, blends |
| Feeding | Creel for cans Ø 400, 500, 600 and 700mm, single and double end |
| Number of cans | 6 or 8 |
| Pitch | 355mm |
| Rovings per can | 2/4 |
| Cans | Ø 500mm, height 1,000mm |
| Drafting system type | Double apron |
| Maxi input load | 12 to 15ktex according to the material |
| Rowing weight range | 0.4 - 2,5ktex/ Nm 0.4 to 2,5 |
| Doubling | 1 or 2 |
| Feed cylinder diameter | 40mm |
| Draft apron width | 145mm |
| Draft cylinder diameter | 25 and 50mm |
| Pressure cylinder diameter | 65mm |
| Pressure on draft cylinders | 80daN (approx. 80kg) by pneumatic ram |
| Total nip | 327.5mm |
| Draft range | 6.88 to 19.95 (by gear box) |
| Rubbing speed | 1 horizontal zone 1,200 cycles/min maxi |
| Number of rubs | 5-6-7rubs/m |
| Rubbing apron width | 160mm |
| Delivery speed | Up to 220m/min according to the material |
| Compressed air pressure consumption | 6 bar / 2Nm3/h |
| Total installed power | 22.5kW |
* Subject to modifications
