Designer of industrial equipment for textiles of all types
D2/D3/D5 GC40 blender defelter
Technical supportD2/D3/D5 GC40 blender defelter
The D5 GC40 blender defelter is the association of 4 drafting zones between 5 sets of cylinders and a chain gill placed inline. The D2/D3 GC40 defelter is simple and compact solution perfectly adapted to:
- The tow to top lines which not require high doublings
- The blending and defelting operations after dyeing backwashing
- The fine fibres.
The 5 sets of cylinders permit a high doubling up to 40 slivers and an input load up to 2 x 500ktex. The drafting zone comprises an efficient suction system. The D2/D3/D5 GC40 blender defelters can be equipped in option with an electronic draft autoleveller. The man/machine dialogue is achieved by a driving board with touch type screen terminal giving access to the functions of counting, tachometry, display, adjustment and help in diagnosis.
Technical specifications *
| D2 GC40 | |
| Delivery speed | Maxi 600m/min |
| Total mechanical draft between the cylinders | D2: 1.3 |
| Maximal input load | D2: 260ktex |
| Pressure by the coated cylinder | Total: 1,100daN Linear: 23daN/cm at 52 bars Length: 280mm |
| Sets of cylinders | Ø 70mm, pressure Ø 130mm |
| Total installed power | 24.1 - 27.6kW |
| D3 GC40 | |
| Delivery speed | Maxi 600m/min |
| Total mechanical draft between the cylinders | D3: 1.6 |
| Maximal input load | D3: 320ktex |
| Pressure by the coated cylinder | Total: 1,100daN Linear: 23daN/cm at 52 bars Length: 280mm |
| Sets of cylinders | Ø 70mm, pressure Ø 130mm |
| Total installed power | 24.1 - 27.6kW |
| D5 GC40 | |
| Delivery speed | Maxi 600m/min |
| Total mechanical draft between the cylinders | 2.7 to 4 |
| Maximal input load | 2 x 500ktex |
| Pressure by the coated cylinder | Total: 2,040daN Linear: 23daN/cm at 52 bars Length: 480mm |
| Sets of cylinders | Ø 70mm, pressure Ø 130mm |
| Total installed power | 25.8 - 29.3kW |
* Subject to modifications
